An Expert Guide to Assessment Validation: Validating Assessments
An Expert Guide to Assessment Validation: Validating Assessments
Blog Article
RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.
Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.
Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation must be conducted.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
An Overview of the Two Types of Assessment Validation
Assessment Validation Unpacked
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This piece will highlight assessment tool validation.
How to Conduct Assessment Tool Validation
Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.
When Assessment Tool Validation Should Be Done
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.
Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:
- resources are updated
- new training products are added to your scope
- course is reviewed by you against training product updates
- learning resources get identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
Choosing Training Products for Validation
Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.
Key Resources for Assessment Tool Validation
Educational Resources
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.
Panel for Validation
Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.
Your validation panel, as a group, must possess:
Vocational competencies and industry skills relevant to the unit being validated
Current knowledge and expertise in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the equivalent successor
Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Basic Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?
Fundamental Rules of Evidence
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge get more info required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:
Be Consistent with Your Teachings
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
changing diapers
prepare bottle, bottle feed babies and clean equipment
prepare solid food and feed infants
appropriately respond to baby signs and cues
prepare babies for sleep and soothe them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Total or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?
The answer might include:
Necessary materials
Associated costs
Time frame for activities
Designated roles and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolation, use of engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolating, engineering, administration
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.